Fusion splicer also need power

Fusion splicer also need power

Fusion splicer is mainly used for optical communication, cable construction and maintenance. Mainly by the release of the arc will be two fiber melting, while the use of straightening principle to gently push forward to achieve the coupling of the optical mode field. Welding machine is mainly used in major telecom operators, engineering companies, enterprises and other private network. Also used in the production of fiber optic passive and active devices and modules such as fiber welding.

Fusion splicer also need power, but some AC power can not receive the case, some welding machine can use one of the backup battery. Usually these battery packs can provide 2 to 3 hours of power required, depending on the manufacturer, and the battery can be recharged.fusion splicer

Operating the fusion splicer is not complicated, but it is not as simple as it is easy to operate the pre-milled connector. When operating the pre-milled connector, the operator can stand on the ladder, head the probe into the ceiling, and successfully connect the pre-milled connector in a dim environment, even in extremely difficult environments, the operation can also be done very well.

Share this post