How fiber jumper connect?

How fiber jumper connect?

Fiber jumper is also called (fiber connector), it is an unloaded connection device between fiber and fiber, then how the fiber jumpers connect is right, what kind of fiber jumper connection better?
Optical fiber jumper is to connect the two ends of the fiber to transmit optical fiber output to maximize the energy coupling to the receiving fiber to go, and because of its involvement in the optical link to the system caused by the impact of the smallest.
Fiber jumper connection
Single-mode fiber single-mode, single-mode transmission distance of about 1500, dual-mode can reach 10 a few kilometers. Optical fiber can be converted to RJ45 ordinary optical cable or RS232 cable signal.
Optical fiber jumper is generally connected to the splitter or optical frame, optical fiber jumper connection Optical, optical transceiver can be the signal we usually use the electrical signal. Optical fiber jumper is the link at both ends of the equipment, usually fiber box is connected ST head, switch fiber optic module on the LC head, fiber optic transceivers sc head, Optical and ODF frame on the fc head.
ST-LC, LC-LC, ST-SC, etc., what kind of model depends on your fiber-optic equipment interface is ST or LC (Fiber Optic Cable) Or SC. Jumper is also divided into single-mode.
Fiber jumper how to connect
Here is a fiber jumper connection example of the application:
Bureau of fiber to the enterprise, is generally the first dual-mode fiber to the enterprise host room, and then into the Optical, converted to RJ45 signal into the enterprise firewall, and then into the CORE, fiber optic transceivers and fiber optic cable can be converted into fiber, The internal optical fiber transmission to the various sub-room.
Fiber jumper connection method must be decided according to the actual situation, so in order to reduce unnecessary trouble, it is more confidence to find a professional construction team to install.

Share this post