Core to core alignment by PAS technology
( PAS:Profile Alignment System)
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display
USB & VGA interface
Software upgrade via USB interface
| Model |
KL-300 |
KL-300T |
KL-195 |
KL-280 |
| Applicable fibers |
SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) |
| Fiber cleaved length |
8 ~16mm （Coating diameter：250µm） |
| Fiber diameter |
Cladding diameter：80 ~150µm , Coating diameter：100 ~1000μm |
| Fiber Count |
Single |
| Auto focusing |
Available |
Unavailable |
| Fiber aligning method |
Core aligning， clad aligning， manual aligning |
clad aligning with fixed V-groove |
Core aligning |
| Average splice loss |
0.02dB （SM）, 0.01dB (MM), 0.04dB (DS), 0.04dB( NZDS) |
| Splicing time |
Typical 9 sec，with standard SM fiber |
| Splicing program |
53(templet), 40(user) |
12(templet), 188(user) |
| Storage of splice result |
4000 results，20 parameter per result |
5000 results 3 parameter per result |
| Fiber image magnification |
300X （X or Y view）,150X （X and Y view） |
125X （X and Y view） |
400X （X or Y view），200X （X and Y view） |
| Heating time |
Typical 30 sec |
| Heating program |
9(templet), 24(user) |
Heating time can be adjusted |
| Heating temperature adjust |
Available |
Unavailable |
| Applicable sleeves |
60mm, 40mm and a series of micro sleeves |
| Tension test |
2N |
| Electrode life |
2500 |
| Battery capacity |
Typical 160 cycles （splice and heat） |
| Monitor |
5.7 inch TFT color monitor |
5 inch color LCD monitor |
| Terminal |
USB 1.1 and VGA , software upgrade via USB interface |
RS232 |
| Operating condition |
0 ~ 5000m above sea level, 0 ~ 95%RH and -10～50℃, respectively, Max. wind velocity of 15m/s |
| Power supply |
AC 100-240V with AC adapter; inner Li-battery(8000mAH) |
| Dimension |
150mm(L)×150mm (W)×150mm (H) |
150mm(L)×150mm (W)×160mm (H) |
| Weight |
2.7 Kg excluding battery, 3.2 Kg including battery |
3.1 Kg including battery |
3.52 Kg including battery |
|
Model
|
KL-300
|
KL-300T
|
KL-195
|
KL-280
|
|
Splicing mode
|
Auto 、Calibrate 、normal 、Special
|
Auto
|
|
Fiber cleaved angle threshold set
|
0.1 ~ 10.0 ° , 0.1°step
|
0.5 - 8° , 0.5°step
|
|
Display fiber cleaved angle
|
Available
|
Unavailable
|
|
Display fiber offset angle
|
Available
|
Unavailable
|
|
Auto detect cleaved endface fault
|
Available
|
Unavailable
|
|
Display core offset
|
Available
|
Unavailable
|
|
Display clad offset
|
Available
|
Unavailable
|
|
Arc strength automatic adjustment
|
Available
|
Unavailable
|
|
Display inside temperature
|
Available
|
Unavailable
|
|
Display ambient temperature
|
Available
|
Unavailable
|
|
Display heater temperature
|
Available
|
Unavailable
|
|
Display air pressure
|
Available
|
Unavailable
|
|
Display battery voltage
|
Available
|
Unavailable
|
|
Sleep
|
Available
|
Unavailable
|
|
Auto Shut down
|
Available
|
Unavailable
|
