Fusion Splicer KL-280G

Fusion Splicer KL-280G

Core-Core & Clad – Clad Alignement

PAS Technology

Fiber core & clad display with high resolution

X&Y view display or X/Y single display

Auto check leaved end face

5.7 inch color LCD

Software update via USB port

Category:
  • Specifications
  • Discription
  • Demo Video

Applicable fibers

SM  MM  DS  NZDS

Fiber diameter

Cladding diameter:80-150μm; Coating diameter:100-1000μm

Fiber count

Single

Fiber cleaved length

12-16mm (Coating diameter:250μm)

Actual average splice loss

0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)

Typical splicing time

Typical 9 sec (standard SM fiber)

Return loss

>60dB

Splicing mode

Auto Calibrate Normal Special

Fiber aligning method

Meticulous、Core、Clad、Manual

Splicing program

53 (templet), 40(user)

Tube heating program

9 (templet),24(user)

Tube typical heating time

Typical 30 sec

Protection sleeve length

60mm, 40mm

Storage of splice result

4000 results, 20 parameter per result

Fiber image magnification

300X (X or Y view),150X  (X and Y view)

Battery capacity

Typical 400 cycles (splice/tube heat with inner Li-battery)

Monitor

5.7 inch color LCD monitor

Tension test

2N

Electrode life

2500

Terminal

USB

Power supply

AC 100-240V with AC adapter Inner Li-battery (7800mAH)  DC 13.5V

Operating condition

0-5000m above sea level, -10-50℃  Max wind velocity of 15m/s

Dimension

150mm(L)×150mm(W)×150mm(H)

Weight

2.55Kg excluding battery,3.05Kg including battery

Specifications of Jilong Fusion Splicer

Specefications

Model

KL-350E

KL-300T

KL-280G

KL-500E

KL-510E

Actual average splice loss

 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)

Splicing mode

 Auto、  Calibrate、  Normal、  Special

Fiber aligning method

 Meticulous、 Core、 Clad、 Manual

Typical splicing time

 Typical 9 sec (standard SM fiber)

Tube typical heating time

 Typical 30 sec

Splicing program

53 (templet), 40(user)

Tube heating program

9 (templet),24(user)

Storage of splice result

4000 results, 20 parameter per result

Tension test

2N

Terminal

USB

Electrode life

2500

Fiber image magnification

300X (X or Y view),150X (X and Y view)

120X (X or Y view), 60X (X and Y view)

Monitor

5.7 inch color LCD monitor

3.5 inch color LCD monitor

Battery capacity (splice/tube heat)

Typical 400 cycles

Typical 300 cycles

Typical 150 cycles

Power supply (Inner Li-battery)

7800mAH

5200mAH

2600mAH

Power supply (AC)

AC 100-240V with AC adapter   DC 13.5V

Operating condition

0-5000m above sea level, -10-50℃  Max wind velocity of 15m/s

Dimension (L×W×H)

150×150×150 (mm)

125×105×113 (mm)

193×125×85 (mm)

Weight (including battery)

3.05Kg

1.3Kg

1.1Kg

 

Function Comparision of Jilong Fusion Splicer

Model

KL-350E

KL-300T

KL-280G

KL-500E

KL-510E

Display fiber cleaved angle

Display fiber offset angle

Display core & clad offset

Fiber angle limit

Air pressure auto compensation

Real-time arc calibration

Display inside temperature

Display ambient temperature

Display heater temperature

Display air pressure

Display battery voltage

Image turn over

Taper splice

Sleep

Auto shut down

Software upgrade via USB

280g a

Core-Core & Clad - Clad Alignement

PAS Technology

Fiber core & clad display with high resolution

X&Y view display or X/Y single display

Auto check leaved end face

5.7 inch color LCD

Software update via USB port