Fusion Splicer KL-300T

Fusion Splicer KL-300T

Category:
  • Specifications
  • Discription
  • Demo Video
Menu
  300t menu
DISPLAY
  300t d
Specefications

Applicable fibers

SM  MM  DS  NZDS

Fiber diameter

Cladding diameter:80-150μm; Coating diameter:100-1000μm

Fiber count

Single

Fiber cleaved length

12-16mm (Coating diameter:250μm)

Actual average splice loss

0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)

Typical splicing time

Typical 9 sec (standard SM fiber)

Return loss

>60dB

Splicing mode

Auto Calibrate Normal Special

Fiber aligning method

Meticulous、Core、Clad、Manual

Splicing program

53 (templet), 40(user)

Tube heating program

9 (templet),24(user)

Tube typical heating time

Typical 30 sec

Protection sleeve length

60mm, 40mm

Storage of splice result

4000 results, 20 parameter per result

Fiber image magnification

300X (X or Y view),150X  (X and Y view)

Battery capacity

Typical 160 cycles (splice/tube heat with inner Li-battery)

Monitor

5.7 inch color LCD monitor

Tension test

2N

Electrode life

2500

Terminal

USB

Power supply

AC 100-240V with AC adapter  Inner Li-battery (7800mAH)  DC 13.5V

Operating condition

0-5000m above sea level, -10-50℃  Max wind velocity of 15m/s

Dimension

150mm(L)×150mm(W)×150mm(H)

Weight

2.55Kg excluding battery,3.05Kg including battery

 

Specifications of Jilong Fusion Splicer

Specefications

Model

KL-350E

KL-300T

KL-280G

KL-500E

KL-510E

Actual average splice loss

 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)

Splicing mode

 Auto、  Calibrate、  Normal、  Special

Fiber aligning method

 Meticulous、 Core、 Clad、 Manual

Typical splicing time

 Typical 9 sec (standard SM fiber)

Tube typical heating time

 Typical 30 sec

Splicing program

53 (templet), 40(user)

Tube heating program

9 (templet),24(user)

Storage of splice result

4000 results, 20 parameter per result

Tension test

2N

Terminal

USB

Electrode life

2500

Fiber image magnification

300X (X or Y view),150X (X and Y view)

120X (X or Y view), 60X (X and Y view)

Monitor

5.7 inch color LCD monitor

3.5 inch color LCD monitor

Battery capacity (splice/tube heat)

Typical 400 cycles

Typical 300 cycles

Typical 150 cycles

Power supply (Inner Li-battery)

7800mAH

5200mAH

2600mAH

Power supply (AC)

AC 100-240V with AC adapter   DC 13.5V

Operating condition

0-5000m above sea level, -10-50℃  Max wind velocity of 15m/s

Dimension (L×W×H)

150×150×150 (mm)

125×105×113 (mm)

193×125×85 (mm)

Weight (including battery)

3.05Kg

1.3Kg

1.1Kg

 

Function Comparision of Jilong Fusion Splicer

Model

KL-350E

KL-300T

KL-280G

KL-500E

KL-510E

Display fiber cleaved angle

Display fiber offset angle

Display core & clad offset

Fiber angle limit

Air pressure auto compensation

Real-time arc calibration

Display inside temperature

Display ambient temperature

Display heater temperature

Display air pressure

Display battery voltage

Image turn over

Taper splice

Sleep

Auto shut down

Software upgrade via USB

 

300t e

Core-core & clad-clad alignment

PAS technology

X&Y display or X/Y single display

Auto check & display cleave angle and offset angle

Display fiber core & clad offset

5.7 inch color LCD

Software update via USB port

Up to 400 splice&heating cycles