Using method of Multifunctional Fixture of Optical Fiber Fusion Splicer

Using method of Multifunctional Fixture of Optical Fiber Fusion Splicer

With the upgrading of fiber optic fusion splicer, now the market of fiber optic fusion splicer fixture are basically started using multi-fixture, it can stabilize a variety of different types of fiber, such as leather line, jumper, bare wire
Such as 0.9; 250; 3.1; 3.0 and other monomer fixture, with this fixture does not need to be aligned, because you are moving the fixture as a whole; However, for multi-fixture to the multi-function fixture, Said, you need to put a distance to control, the following to introduce the use of multi-fixture need to align several places:

1, fiber optic fiber to stay three millimeter coating: fiber requires about three millimeters of coating, this step requires dial fiber with three Miller clamp the middle hole to remove the skin, with the innermost hole to remove the coating, but Retain three meters of rice;
2, the optical fiber cutting the top of the coating alignment fixture top
3, placed fiber: placed in the optical fiber welding fixture, the coating will be the top of the fixture with the top of the fiber welding machine alignment;
The reason for this is to ensure that the length of the fiber on the V-groove after the smoke from the distance of the electrode rod is just right to ensure that the slide to promote the two fixtures and fiber close to the distance in the range of activities; welding quality can be guarantee

Share this post